A new version of CC3+ is available now, adding full GUI access for more button sizes, as well as better custom palette handling, bitmap tracing, fractalizing and house symbol mirroring. Also a few smaller bugs where fixed.

Version Notes

CC3+ Version 3.91
=================
– Added PALLOAD and PALSAVE commands to load and save different custom palettes.
– Added GUI option (Screentools button) to allow user to pick any of the 4 available icon resolutions instead of just large/small.
– Added a TRACE and TRACED command to trace around a bitmap in a more general way than the CONTOURSM family of commands.
– Modified Fractalize (FRX) command to affect outlines even if they are separate entities.
– Modified roof shading code to flip angles by 180 degrees when specifying mirrored on bitmaps
– Fixed blur radius computation in effects when using Map Units.
– Fixed lighting direction on mirrored symbols (initial implementation in June was incorrect).
– When the system issues a “no matching drawing tool” message, will now show the tool name that it was looking for.
– Cosmographer 3 deckplan bitmap templates can now add new grids?
– Fixed bug in FastCAD core that was preventing higher-resolution icon sets from loading.
– Fixed crash on exit when writing XML file that was intermittently appearing as project changed.

Download this latest update from your registration page.

Rationale

The method below is to accurately display your FT3 map at any projection as a CC3+ map, with all the climate zones, altitudes and major rivers in their correct places no matter what the projection, and also to allow fine tuning the map in a way designed to add extra detail without changing the original FT3 map to any great degree.

The method requires as much detail in creating the FT3 map as possible – see articles on designing FT3 maps. Especially, this requires attention to altitude, climate zones, islands and rivers.

Prior to export

The most popular projections are:
• Equirectangular – increasingly inaccurate as you travel away from the equator
• Hammer – distorted increasingly as you travel to the east and west borders
• Sinusoidal – accurate and not so distorted, but discontinuous. Can be used to make an actual globe, especially the 18-way Stereographic Gores.
• Orthographic – allows you to centre on the landmass in question and see it most accurately of all in a continuous fashion. Used also to make maps centred on the North or South poles.
• AE Hemispheres – presents the map as 2 hemispheres (E and W). For best results, make your original draft map in FT3 as an AE Hemisphere projection, and then refine it at the equirectangular projection. This enables you to make sure there is not too much land overlapping each hemisphere – see below for preferred (left) and not preferred arrangements (right).

Continue reading »

Accompanying CC3+ and it’s addons are a host of different symbols, all arranged neatly into symbol catalogs. These catalogs are arranged by map type, map style, and symbol theme/content. For example, there is one symbol catalog containing structure symbols from the Mike Schley Overland style, while a completely different symbol catalog contains furniture symbols from the standard DD3 dungeon style. Generally, these catalogs are arranged in such a way that clicking the various symbol catalog buttons (the toolbar right above your mapping area) loads different symbol catalogs relevant to the current map type and style. And if you need a symbol catalog from a different style, you can always click the Load Symbol Catalog button and browse for a different symbol catalog manually.

But did you know that CC3+ allows you to easily manage these catalogs and their content? For example, you can create a new catalog containing all your favorite symbols, collecting symbols from different styles and even map types into one catalog. In this article, I’ll guide you trough making such a custom catalog; for this example, I’ll be making a catalog that collects all the statue symbols from the various dungeon styles I have available to me. I often use statues as dungeon/floorplan dressing, and it would be great to have all of these available in one place. This catalog will mix symbols from different styles, so not every symbol in this catalog will work in every map obviously, but you can often mix symbols from different styles with great success.

Continue reading »

This is part 2 of the “Creating a New Map Style” series of articles.

After we have decided on a style to create last month, let’s take a look at creating the first new pieces of artwork. One of the defining aspects of a style are fill styles it uses.

1. Creating new Bitmap Fills

Let’s take a look at the bitmap fills used in the World of Wonder style, which serves as the basis for our new style. Open the CC3+ program data folder in Windows Explorer: C:\ProgramData\ProFantasy\CC3Plus and find the subfolder /Bitmaps/Tiles/Overland/Annual Worlds of Wonder/. You’ll see that it includes 9 different fills, with at four different resolutions each.

Create a new folder under /Bitmaps/Tiles/Overland/ called “Annual Worlds of Wonder BW”, then copy the VH resolution file of each fill over to the new folder. Remove the _VH part of all the file names. Now you can open up the individual files in a Bitmap editor (like Photoshop or Gimp to edit the textures. I’m doing some very simply operations here, converting the files to greyscale to match our idea of a black and white stlye, and I rotate some of them and/or apply a photo filter. Of course you can be as elaborate as you want, even creating complete new graphics, but for the purpose of this tutorial I’ll keep it simple.

2. Importing the New Fills

Let’s get the new fills into our map template. TO do so, we need to start CC3+ and load our template /Templates/Overland Maps/Wizard/Annual Worlds of Wonder BW.FCT. The select Tools > Import bitmap fill styles from the menu.

The import bitmap fills dialog comes. “Browse” to our newly created source folder and select one of the files. Check the “Create other resolutions option and set “Scaled” to 1000.00 for both width and height. To differentiate the new bitmap fills from the old ones, change the “Suffix” to _BW (for our black and white style). Then click OK and let CC3+ do its work.

3. Changing the Existing Fills

There are only a few entities in the template that use the old (coloured) fill styles, but even if there were more, it is easy to change them:

• Right-click the Change Properties button and choose Change Fill Style.
• Right-click on the map to select, then choose More > Fill Style.
• Right-click to bring up the fill style dialog and choose “CA145_Parchment” from the Bitmap Files tab. Click Ok.
• Right-click and choose Do It.
• Right-click to bring up the fill style dialog again and choose “CA145_Parchment_BW”. Click Ok.

You’ll see that the parchment border of the map has turned grey. You can now do the same for each of the existing fill styles, but for this map you really only need to do it for the CA145_Ocean fill, as that is the fill of the background rectangle.

The template now shows a greyscale version of the old one and that’s how we wanted it to be. Next time we’ll start of converting the symbols of the style into the new look.

The Symbols in Area command was introduced in CC3+ long after most of the basic styles were created, meaning it is not used in those styles’ drawing tools. But since it is very useful for creating terrain features like scattered woodlands, why not set up some new tools to make use of it? In this little article I’ll take you through doing exactly that. As an example I’ll create a scattered deciduous woods for the Mike Schley overland style.

1. Setting up the Symbols In Area command

• First, load an existing or start a new Mike Schley overland and choose the Symbols in Area command from the Draw menu.
• Click Browse and load the Vegetation catalog from /Symbols/Maps/Mike Schley/
• Set the settings as shown in the screenshot on the right, then Save the setting under \System\Fillers\MS_WoodsDecid.symfill

If you want to test and possibly adjust the settings, draw a smooth polygon on the map and use the command on it after clicking OK in the Symbols in Area dialog.

2. Creating a new Drawing Tool

Now we need to set up the new drawing tool for this setting.

• Right-click the Terrain Drawing tools button and click the Advanced button.
• Select the tool Terrain Default, Forest Decid and click New.
• Name the new tool “Terrain Default, Woods Decid” and save it.
• Click Command to Execute and enter the following macro:

SYMFILLLOAD @system\fillers\MS_WoodsDecid.symfill
SELSAVE
SELBYP
SYMFILLM
SELREST

• Save the tool and you’re good to use it.

3. Creating a Drawing Tool Preview.

You’ll notice that the tool doesn’t have a preview at this point. That’s because a macro-using drawing tool needs a little FCW file (CC3+ map for the preview. Let’s create this as a bonus step – it’s not really necessary but useful.

• Load the foilowing FCW file in CC3+ from your Programdata folder (which might be different from the path show here): C:\ProgramData\Profanatsy\CC3Plus\System\Drawtools\Overland Mike Schley\Terrain Default, Forest Decid.FCW and save it in the same folder under the name Terrain Default, Woods Decid.FCW. This is the same file name as the drawing tool we created, only with a different file extension.
• Erase all trees from the file, but leave the gray background.
• Use the Symbols in Area command with the settings we’ve previously created, then Save the map.

And that’s all there is to creating a scattered woods drawing tool. You can do the same with pine or jungle trees, or any type of symbol you want. Here is an example created with the new drawing tool:

While Campaign Cartographer offers a wide range of different drawing styles to use, sometimes you just want that special look that anybody else uses, and few things are more rewarding than creating your own unique mapping style. We have covered some of the process of doing this in the first Annual Volume, but quite a few features have been added to CC3+ since then and the Annual issue couldn’t cover all possible options in high detail.

So I thought that a publicly-available article series might be a good way to document the process step-by-step and in higher detail than an Annual issue can. It should also give everyone the opportunity to pitch in with questions along the way. So, let’s get started…

1. What map type to use?

The first decision to make is what type of map style we want to create. A city style? One for floorplans? I know what I’m going to do for this article, my favorite type of maps: an overland maps style.

Let’s take a look at what styles are already available in CC3+. To do this you need to open the CC3+ program data folder in Windows Explorer: C:\ProgramData\ProFantasy\CC3Plus. If you installed CC3+ in a custom location, you will need open that folder. If you don’t see the ProgramData folder at all, it may be “hidden” in Windows 10. Make sure to activate the option “Show hidden files/folders” in Windows Explorer and it should appear.

Now navigate to the Templates subfolder, then Overland Maps, then Wizard. Here you see all the different overland wizard templates listed. Each template consists of three files: The CC3+ template (FCT extension), a preview bitmap (the PNG file) and a short text info file (TXT). For most of the file you will see two sets of 3 files, one for metric units and one for imperial ones. As the template forms the basis for a map style, we will need to create a new set.

2. Creating a New Wizard Template

I find it easiest to start a new style based on an existing one. It might only be vaguely similar, but copying an existing style makes it easier to not forget necessary bits and pieces and gives you a set of styles to start from. That means we need to decide what style we want to create at this point. I am thinking January’s World’s of Wonder style would look good in black-and-white, so I decide to create such a style for this article. I locate the three files (for imperial units) in Explorer as shown on the right.

Select the three files and use the clipboard to copy them (ctrl-c, then ctrl-v). Windows will rename these copies by appending “- copy” to the filename. Rename all three to the name of your new style (e.g. Annual Worlds of Wonder BW.*). Make sure the file names are all exactly the same, except for the file extension. We won’t worry about the metric version of the template yet – we can create that much later when most of the work is done.

3. A New Drawing Tool folder

After the template, the next important part of a style is the set of drawing tools to go with it. Again, we can create a new one by copying an existing set. Navigate to the ProgramData\ProFantasy\CC3Plus folder again and then go to System\Drawtools\. You will see a folder for each drawing style. Again, create a copy of the folder “Annual Worlds of Wonder” and rename it to “Annual Worlds of Wonder BW”. We don’t need to worry about the files in the folder at this point.

4. Setting the Template to the new Drawing Tools

Now it’s time to open CC3+ for the first time. Navigate back to the Templates/Overland Maps/Wizard and double-click the template file Annual Worlds of Wonder BW.FCT to open it in CC3+. Naturally it still looks exactly like the Worlds of Wonder style, as it’s just a plain copy of it. Select File > Drawing Properties from menu to open the Drawing Presets dialog. In the Drawing Style section select the new “Annual Worlds of Wonder BW” from the list. Basically this tells CC3+ which folder to choose the drawing tools from when you click the drawing tools buttons on the left-hand toolbar. If we now make changes in this template on the its drawing tools, they won’t affect the original Worlds of Wonder style but be restricted to the new Worlds of Wonder BW style instead.

If you have your own ideas for creating a style you can already start tinkering with the template and the drawing tool. We will continue in the next article with changing the bitmap fills that the style uses. If you have any questions concerning this article and creating your own drawing style, feel free to do so in the comments below, or – for easier discussion and more help from other users – go to the forum thread I have created for this series of articles.

Whenever you add a new effect to a map in Campaign Cartographer, you are presented with a small choice about which effect units to use. In these article, I’d like to talk a little bit about these choices, what they really mean, and which setting to pick in each situation.

In general, the effects units affect how you specify effect sizes, such as the width of an edge fade, the length of a shadow and so on. It does not affect the strength of the effect (although changing the size of an effect, such as a glow, will indirectly make it feel stronger as well).

The three available settings are

• Percent of View Width
  This setting makes all effect sizes depend on your current view. This means that effects will actually change as you zoom in and out of the map.
• Map Units
  This setting means that all effect sizes are absolute, and expressed in the same units as your map is in. For example, a (non-metric) dungeon map is expressed in feet, so this options means that the sizes of the effects is expressed in feet as well.
• Percent of Drawing Extents Width
  With this setting, the size of the effects depends on the size of your actual map. For example, if you set the length of a shadow effect to 1, and your map is 400 map units, than shadows will be 4 units long (1% of 400 is 4). As above, what a unit means is based upon your map type, for example feet in a dungeon or city map.

So, let us look into what the different settings are most appropriate for, along with some examples.

Continue reading »

The Continent of Dorina

A brief note about this article

The main reason I have never written about the special effects I use in my maps before now is because they have to be applied differently on each new map I draw. Differences in map style and the random variability of the way I chose to warp the colour scheme each time have made it very hard to nail down any particular method to the point of there being a right or a wrong way of doing it, and it’s nearly impossible to make a definitive set of instructions when nothing is set in concrete. I have often used similar combinations of effects on similar sheets in different maps once I discovered a useful result by experimentation, but I don’t think I have ever used exactly the same settings on any two maps. So what follows is more a train of thought and an explanation of my method as I develop two example maps of the same place in two different styles in tandem. However, and having said that, there are a few simple instructions on how to generate and process sea contours in the first of the special effects to be described.

This article focuses on two versions of the continent of Dorina shown above in the Mike Schley style (MS) and the Herwin Weilink style (HW). I have chosen these styles because they are available to all CC3 mappers, and because they are so different in nature that the special effects will have to be applied differently to each one. By describing this process and providing the finished FCW files for reference purposes, I hope that those of you who have requested tutorials about how to get similar special effects to mine in their own maps may at the very least gain some useful information and ideas.

The effects I will be working on in this article are oceanic contours, global colour shifts, contrast adjustments, snowfields and something I’ve called ‘midnight’, which entirely changes the nature of the map in a way that makes it vaguely reminiscent of a view seen under brilliant moonlight.

First off, then, I should probably start with the basic stuff – how much I have already warped the default styles to produce the initial maps before we get started on the special effects. Please note that for some reason I set the scale of these maps completely wrong, but it was too late to go back and start again by the time I got to the finishing touches. I didn’t realise until I was adding the scale bar and it was out by a very large factor.

Dorina – MS

The MS style is beautiful in its clean and radiant pastel colours. Unfortunately for me it is those very same pastel shades that make doing the kind of special effect I do quite difficult to achieve on an MS map. While I can appreciate the loveliness of many very different styles my personal taste tends more towards richer, darker colours. If you open the Dorina – Mike Schley.FCW file you will see that the sheets have been dramatically altered, so that while I tried very hard not to take it too far away from the intended appearance as to be unrecognisable as an MS map, I have used lots of Adjust Hue/Saturation and RGB Matrix effects. I have also swapped out some of the textures for others in the same set and changed their colours accordingly. I love the grassy texture of the Marsh_MS fill, and so I have abused it by using it for anything that is at all grassy in nature. There are other fills I’ve substituted, but even though I’ve bashed it about quite badly (and I cringe to think of what the purists would say) all the fills are MS fills and part of that style. There is nothing there that doesn’t come from the Mike Schley mapping style.

Dorina – HW

You might think the HW style is made for me, with my already stated preference for darker, richer colours, but my taste is less subtle and a couple of degrees lighter in tone. I have done exactly the same thing with the HW map as I’ve done with the MS style – lots of colour changing sheet effects aimed at making everything a little brighter than before. I haven’t swapped out so many of the fills, but I do very much like the grassland fill and I’ve used it in several shades on different sheets. There are couple of sheep and cows and a horse that remain from the MS version where there is no HW equivalent.

Continue reading »

The Master Mapper award has been on hiatus for a few years, but certainly not because of a lack of awesome cartographers out there! It’s our fault due to being busy with other things and not being able to make our mind up who among so many great Campaign Cartographer users we should single out. Well, we are certainly going to change that and start out by awarding the honor to not one, but two deserving mappers! For that we are going back a bit in time …

Master Mapper 2017: Joe Sweeney

Awarding Joe Sweeney the Master Mapper title for one specific year is like saying “D&D was the most popular role-playing game this year” – it’s true, but it doesn’t say much! Joe has been a great asset to the community for years, creating templates, maps, free resources and videos.

As Joe has been supporting the CC user community for ages and we felt it was high-time we properly recognized that contribution.

So we just picked a recent year and declared him Master Mapper of 2017 for:

• Helping oh so many mapper with his highly instructive video tutorials.
• Designing templates for highly re-usable dungeon and starship stiles.
• Drawing beautiful maps.
• Hosting and contributing to a tiled texture collection for anyone to use.
• And running a whole Master Mapping Class website.

We can’t thank Joe enough for the support he has provided to the Campaign Cartographer community over the years. You are a true Master Mapper in all meanings of the word!

Master Mapper 2018: Christina Trani

When looking at all the beautiful maps submitted to the community in 2018 we at first felt overwhelmed at all the material. How could we decide on a Master Mapper from among all those great cartographers? But one did indeed stand out when we looked a little closer. There are so many consistently beautiful maps created by Christina Trani (Lorelei on the forum), it became clear to us she is indeed the Master Mapper of 2018.

The Master Mapper award for 2018 goes to Christina for:

• Creating a large number of amazingly beautiful maps.
• Pushing the boundaries of what can be done in Campaign Cartographer, expanding the horizon of all its users.
• Being active in the Facebook user group and the community forum.
• And for supporting and contributing to the Community Atlas project.

Thank you Christina for being such a great part of the Profantasy user community. Please continue amazing us with your beautiful maps and pushing the boundaries of CC3+. Continue being a Master Mapper!

If you want to check out which user have been awarded the title of Master Mapper in the past, check out the Master Mapper page which lists them all.

Many gamers use some kind of digital solution such as virtual table-top software to display maps on a projector or computer screen even when running a local game (as opposed to running a game over the internet, where such software is pretty much required). All of these software solutions have their advantages and disadvantages, but  CC3+ itself may actually be a very good solution, depending on your needs. Now, just to start with the limitations, CC3+ don’t have any kind of remote viewing/projecting options, so this do require that you share the screen you are actually working on (This can be a secondary screen/projector that is set up to mirror yours, or it can be done through screen sharing software, which allow others to see your screen even over the internet).

So, why would you use CC3+ for this? What advantages does it have over other VTT software? Well, the main reason CC3+ is good for this is that this is where you made your map in the first place. This means that the map is fully interactive, and you have all your regular CC3+ tools available to you to manipulate the map during play. If you export the map from CC3+ to an image file for use in a VTT program, then everything becomes static. In CC3+ you can hide or show sheets and layers, you can move symbols and edit whatever you need to do.

Of course, CC3+ isn’t optimized for use during play, while a VTT program is made just for that purpose, so some things are probably a bit more complicated to do in CC3+, so it is up to you if the flexibility CC3+ offer with regards to what you can do with your map during game play is worth it. For this article, I’ll showcase a few features of CC3+ that helps you during play.

Continue reading »