During the last few months, we ran the celebratory competition for the 1000th map in the Community Atlas Project. The competition is now over, and Royal Scribe won the honor of getting the official 1000th map in the atlas, while Ricko Hasche took home the prize for best map by community vote. You can see all the winners, and check an image gallery containing all the maps.

The Winning Entry: Metzvel by Ricko Hasche

I thought I could continue on with the topic of the atlas today, and give a little overview of the macros I use in the project, both in the maps themselves, and the ones I use when processing the maps. To avoid making this a 10-part series, this will just be a basic overview of them, to give people ideas how they can utilize macros in their own mapping.

Continue reading »

We have reached the final article in the series about making mapping tiles. In previous articles (Part 1 – Part 2 – Part 3 – Part 4) we discussed how to design such tiles, how to print or export them for use in other software, and how to make raster symbols in CC3+ from them so we could use the tiles for assembling maps quickly.

But, as we pointed out in the earlier articles, exporting static bitmap images have some limitations. For example, if you rotate them, you change the direction of shadows and patterns in the fill. One could just call it an acceptable tradeoff and move on, but there is a better way, and that is to turn these tiles into advanced symbols in CC3+. By making symbols that contain the actual entities in the tiles instead of static images, directions of fills and effects are calculated when the tiles are used, not when you originally make them, and it also allow you to actually change the content after placing them. In short, if you are going to make maps using the tiles inside CC3+, this is the best approach, so let us dig into how to achieve this.

Continue reading »

Previously in this series, we have developed a set of tiles which we can use to build a space station of any size. Sure, more variation would have been nice, but the four tiles we made are actually enough for any size space station, as long as we accept that it has to be shaped like a rectangle. The previous articles should have given you the information needed to make more tiles though, such as making an inner corner to complete the set and allow for a more complex shape.

Last time, we did look at how to export and print the tiles. Printed tiles could be assembled on the fly at the gaming table, while the exported images are great for combining in just about any program, like an image editor, a Virtual TableTop, or even CC3+ itself. And this is what we will be focusing on in this article, how to use the tiles in CC3+. There are two options here, either we can import the images we exported as symbols and use those, or, instead of exporting our tiles in the first place, we could create symbols directly from the tiles themselves. This latter option gives us some interesting options we will look at in the next installment, but today, we’ll look at creating bitmap symbols.

Continue reading »

I recently finished my 11-year long AD&D campaign with an epic final boss battle. And a good boss battle obviously need a good battle map.

My group is playing in-person, but we use a Virtual Table Top program displayed on a projection screen for our battles. This allow us to zoom out/in on various area, and have a more flexible approach to the area, but for those that prefer using physical miniatures, printing is of course an option as well.

For this project, I did most of the work in CC3+, but it involves using the VTT software as well (MapTool in my case). I’ll keep this article more an overview of the process rather than diving down into the technical details or making a detailed tutorial, but I invite anyone who has any questions regarding the process to drop by the ProFantasy Community Forums and post their questions there, and I will be happy to help.

Continue reading »

In the prior installments of this series (Part 1 – Part 2), we looked at how to create mapping tiles using CC3+. Such tiles can be great for quick mapping, because you can just assemble them in whatever way you need to provide a huge amount of possibilities.

Now that you have your tiles, the big question is of course, how will you use them? I’ll consider 4 main methods. the first of them is simply doing as we did while developing them in part 2, just having the tiles placed off to one side in the map and make copies to slot into place, but I find that a bit inefficient. A far better option if you are going to use them in CC3+ is to define them as symbols, which I will look at in a later installment. Today, I’ll consider the last two options, namely exporting them as images that can be used in any application, including CC3+ itself, and printing them, giving you physical tiles to assemble on the fly at the gaming table. Bot these options have several things in common, so it makes sense to talk about them at the same time.

Continue reading »

Campaign Cartographer is not designed to be a tile-based mapper, rather it is designed to be fully free-form where you can shape things as you want. But sometimes, having a set of pre-made tiles available can allow us to throw together a map quickly, or to serve as inspiration.

Last month, we looked at planning the basic structure for our tiles. Planning is always important, especially with something like making tiles, because we need a structured approach if we want them to actually fit nicely together.

In this installment, we’ll get into drawing a few example tiles using the template we created in part 1. Continue reading »

Campaign Cartographer is not designed to be a tile-based mapper, rather it is designed to be fully free-form where you can shape things as you want. But sometimes,  having a set of pre-made tiles available can allow us to throw together a map quickly, or to serve as inspiration.

Most CC3+ styles doesn’t come with such tiles, but creating our own tiles for use in later maps isn’t difficult, although it is a bit time-consuming if we want lots of nice tiles available for our use, but it can also be a nice relaxing activity, and each individual tile can be finished relatively quickly once you have your basic framework ready.

Tiles can be used for multiple purposes, like battle maps, dungeons, space stations and cities. And of course, a tile in CC3+ isn’t fixed and locked once made, you can make a dungeon using tiles, and then still add or remove individual items after placing the tiles.

Tiles can also be printed and used for assembling a quick location on the table for miniature play.

In this article series, I’ll take you through the creation and use of such tiles, and we’ll look at some of the more advanced options available in CC3+ to make the best tiles.  Continue reading »

When you start a new map in CC3+, you’ll find that there is normally 20 or so sheets in a map. One of the main reasons of these is to ensure the correct drawing order, that symbols goes atop the floor and not below it and the floor goes atop the background terrain, and so on. Most tools will select the appropriate sheet automatically to ensure things goes where they are supposed without the user having to micro manage everything.

Obviously, these sheets are named so their purpose is understandable by people so you can know what their purpose is, but there is also some interesting tricks when it comes to sheet naming that can be used with the tools. This is something to keep in mind when you create your own sheets, as following the appropriate way of naming can help greatly.

Continue reading »

There are many things that sets CC3+ apart from other graphics and mapping programs. One of these differences is the size of the mapping area. In most programs, when you start a new file, you specify a size, and you get a canvas exactly that size. If you try putting something halfway outside the edge, like a symbol or equivalent, the spillover is simply lost. In CC3+ however, this is completely different.

CC3+ doesn’t operate with a fixed sized canvas, for most practical considerations it is infinite. There’s nothing preventing you from placing a symbol entirely outside the map area if you so wish, simply because your map only occupies a small spot on that almost infinite canvas. But if the drawing area is of infinite space, how do we determine the actual size of the map? And why do our drawing tools seem to only draw within the map area?

To understand this, we need to look at the map border. When we talk about map borders in CC3+, there are actually two different things we may be talking about. We might be talking about that nice decorative frame around your map. This is known as the decorative map border, and it is just that, decorative. Some map styles have a very elaborate decorative map border, while others have a much more spartan one, sometimes even just a simple line. It doesn’t have any functionality, it is just there to give your map a visual frame. Then we have the technical map border. This is what actually defines your map’s size on the canvas, and all tools that have a restrict to map border option, like drawing tools and bitmap exports work with this one. Usually, it will overlap in location with the decorative map border, but it is the technical map border that provides the functionality.

Continue reading »

Do you have a favorite command in Campaign Cartographer that you use often? One that you wished hat a convenient keyboard shortcut to launch easily?

CC3+ may not have an easy-to use shortcut editor built in, but it still allow you to define shortcut keys for any command you want. All that is required is that the command is defined in the CC3+ menu, but even if it isn’t already defined there, it is easy enough to add it yourself. So if you’re like me and use the List command a lot, why not make it easy to access by adding Ctrl+L as a shortcut key for it?

Continue reading »